,
,
Standard Version
鈻� Nominal force 17 kN @ 6 bar (max. operating pressure)
鈻� Rivet shaft up to 脴 12 mm (Steel 370 N/mm2)
鈻� Spindle stroke 5 - 40 mm with 0.01mm scale and mechanical stroke limit
鈻� Machine weight: approx. 215 kg
鈻� Electro-pneumatic drive鈻� power supply @x@V, @Hz
鈻� Permanently lubricated spindle
鈻� Pressure cup & tool holder Rp=@ mm for forming tool length Ls=@ mm
鈻� BFR-RN-281, Column, incl. height adjustment and table
鈻� Color: light grey RAL 7035
Inklusive
鈻� HPP-010-281, Process Control HPP-25, connections X1, X2, X3, X20, X21
鈻� Incl. SEI-100-281, Distance sensor, Type HPP-25
鈻� Incl. SEI-200-281, Pressure sensors, Type HPP-25
鈻� HPP-X4-01, Connection X4, incl. two-hand relays, for two-hand control and emergency-stop
鈻� NSL-2HD-010, two-hand control via push button (w/out E-stop)
Or NSL-010, footswitch, depending on safety device
鈻� SEI-OTH-281, Sensor upper spindle position (TDC)
鈻� PNP-HPP-281, Pneumatic service unit and pneumatic control package for HPP
鈻� NZ-201, Adjustable task light, 24 VDC, LED
鈻� Manual grease press
鈻� CE Declaration of Conformity
Rotary index table:
鈻� Rotary index table with 4 (optionally 6 or 8) stations. Riveting positions marked on dial plate
鈻� Safety enclosure and Safety gates with safety switches, interlocked with E-stop circuit
鈻� Safety gates separate operator from active stations
鈻� Load & Unload station in front - Station 1
鈻� Mechanical button for setup and correction mode
鈻� Standard accessories and user manual in the language of destination
Options
鈻� Customer specific hole pattern. Price on request
鈻� NSL-2HD-011, Emergency-Stop (push button) integrated in two-hand control enclosure, or inside separate enclosure in case of cycle actuation via foot switch
鈻� HPP-X5-01, Connection X5 for PVM Modul (for control of PNP-PRV-020)
鈻� PNP-PRV-020, Proportional-pressure control, integrated & ready for operation (requires HPP-X5-01)
鈻� HPP-X6-01, Connection X6, external safety / Reset
鈻� NHE-MYC-U-02, Workpiece detection device NHE-U
鈻� NHE-MST-xxx, NHE probe arm and probe (@)
鈻� HPP-DLL-S7L-x, HPP-25 - Siemens S7 Communication link (S7LINK). License code to be ordered for each HPP control
鈻� HPP-DLL-PCT, PC Tool analysis software, incl. UDP Protocol (on USB Stick)
鈻� NZ-039, Automatic spindle lubrication system with lubricant level monitor
鈻� Automatic unloading (requires 6 station table) by air eject or push out, depending on work piece
鈻� Cycle initiation via foot switch instead of two hand control. Requires additional guarding to maintain CE Conformity. Price on request.
鈻� Application specific work piece support fixtures. Price on request.
Subject to change.
